Wood Floor Restoration
 


PRODUCT INFORMATION ‑ SPECIFICATION ‑ HEALTH & SAFETY SHEET
Product:
PRO 2 Protection Undercoat
Completely new and by far the toughest product today.  An emulsion floor seal to renovate old porous floor surfaces.  It is a foundation base for the application of PRO 3. 

PRO 2 can be used on flooring in good condition to enhance the depth of gloss and increase the wear properties on heavy traffic areas.  Make certain all stains and marks are removed and that the floor is free from all soil and previous coatings of floor finish. 

The floor must be perfectly clean and dry.  PRO 2 cannot be removed with conventional floor strippers, so a thorough inspection is essential before application.
Recommended Uses:

Rubber,Vinyl, Vinyl Asbestos, Thermoplastic, Asphalt, Linoleum, Composition, Terrazzo, Marble, Concrete, Quarry Tiles, Ceramic Tiles, Brick, Wood and Cork floors
DIRECTIONS FOR USE

Scrub the floor thoroughly with a solution of PRO 2 to ensure the floor is clean and free from previous treatments.  Then apply two coats of PRO 2 to the floor surface evenly.  Allow the first coat to dry thoroughly before applying the second.
 
1. Container Sizes & Types
5 Liter
polyurethane containers
2. INGREDIENTS  
% BY Weight
Classification
Occupational Exposure Limits

 
N/A
3. HEALTH HAZARD    
Corrosive:
Danger:

Non-hazardous under normal conditions of use.Good standards of industrial hygiene should be followed
4. FIRST AID & TREATMENT
In the event of contact with skin, wash with copious quantities of water.
In the event of contact with eyes, wash with copious quantities of water.
In the event of ingestion, drink plenty of water and obtain medical advice immediately.
5. FIRE FIGHTING MEASURES
NIA
6. ACCIDENTAL RELEASE MEASURES
Small spills can be handled with a mop and water, large spills should be contained with sand or sawdust and disposed of under local authority regulations.
7. HANDLING & STORAGE
Store at room temperature,
Protect from freezing.
KEEP OUT OF REACH OF CHILDREN
Shelf life 2 years.
8. PERSONAL PROTECTION
Avoid contact with the skin. May cause mild irritation to sensitive skin if frequent contact with unprotected skin. Wear protective gloves and clothing.
Avoid contact with the eyes.
This product should not be ingested.
KEEP OUT OF REACH OF CHILDREN
9. PHYSICAL & CHEMICAL PROPERTIES
Appearance, Colour/ Odour:
Translucent emulsion with characteristic odour.
Solubility in Water:
Completely
Biocidal Activity: 
NIA 
Solubility inOrganic Solvent:
Not soluble
pH:
8.0
Flash Point:  
N/A
Density:    
1.022
Stability: 
Stable
Incompatibility:
N/A
10. STABLE & REACTIVITY
Stability:
Stable
Materials to Avoid:  
Not known
Hazardous Decomposition Products:
None
11. TOXICOLOGICAL INFORMATION
Acute Oral LD 50:
5000mg/kg (Rat)
Ingestion:
May cause irritation and nausea.
12. ECOLOGICAL INFORMATION
No available data.
13. DISPOSAL CONSIDERATIONS

Absorbed material may be land filled or incinerated in approved equipment.
14. TRANSPORT INFORMATION
ADR/R1D/IMDG:
Non - hazardous
15. REGULATORY INFORMATION
Contains:
Polycarboxylates:
15% and above, but less than 30%
Phosphates:
Less than 5%
Anionic Surfactants:
Less than 5%
16. OTHER INFORMATION
None

Back to Rubber Refurbishment

 

  



 
 
Total Floor Care, Jamsey Barton, Merridge Hill, Spaxton,Bridgwater, Somerset.TA5 1BB | Telephone: 01278 671185 Email: info@totalfloorcare.com
 
Website Design by Vector7 Ltd | Terms and Conditions