Floor Sanding  
Floor Sanding Bridgwater Exeter Floor Sanding Floor Sanding Bristol Cheltenham Floor Sanding Floor Sanding Cardiff Floor Sanding Swindon
Home Floor Sanding Portfolio Floor Restoration Sectors Sander Hire Maintenance About Us Contact Us
Floor Sanding   Domestic Floor Sanding   Commercial Floor Sanding   Schools Floor Restoration   Village Halls Floor Restoration   Construction
 
 
 
floor sanding
 

Rubber Floor Maintenance


Dalsoulpe Rubber Flooring

Cleaning and Maintenance

Introduction

After the floor has been installed it should be swept clean. Any excess adhesive should be removed by the flooring contractor. No wet cleaning should take place for 7 days, until the adhesive has fully cured (in accordance with the adhesive manufacturer’s instructions).

Preparation

Product:  PRO 1 Heavy Duty Stripper
PRO 1 diluted with 1:10 cold water. Apply the solution sparingly to the floor surface – do not allow it to dry out. Allow 5 minutes contact time. Scrub with standard speed machine fitted with stripping grade pad or brush for higher profile textures. Remove slurry with a wet pickup, damp mop with water, allow the floor to dry thoroughly.

Protection

Product: PRO 2 Protection Undercoat
PRO 3
Emulsion Floor Dressing or (SATIN)
* Important* No one should be allowed on the floor between preparation and protection stages.
PRO 2 Apply neat. An applicator must be used to apply the undercoat. Apply in one direction only, allow polish to dry thoroughly. Apply second coat at right angles to the first, allowing each coat to dry. Should a high gloss finish be required then apply 2 coats of PRO 3 Emulsion floor dressing, allowing each coat to dry.

Maintenance

Product: PRO 4 Maintainer/Floor Finish
The floor should always be dust mopped prior to the following procedures, and spots/stains should be removed with a cloth using undiluted PRO 4.

Damp Mop using PRO 4 diluted 1:50 with water.  An applicator must be used to apply the coats of maintainer.  Allow to dry.

Spray Cleaning (for smooth finishes such as ‘Uni, Marbre, Terrazzo & Granita’) use PRO 4 diluted 1:6 with cold water, spray a fine mist over a manageable area 2-3m2, use a buffing grade pad with a suitable high-speed machine until the floor is completely dry.
Certain profiled textures may require the use of a cylindrical brush-scrubbing machine such as Nilfisk Advance CA340.

Long Term Maintenance

If required, Total Floor Care will can return to site after 3 months to inspect the installation and to offer a long term maintenance program. This is part of our commitment to ensure customer satisfaction.

Wet Areas

External ramps/changing rooms etc. should be treated with PRO 1 as above, then cleaned with PRO 1 diluted 1:200 with cold water, allow the floor to dry.

Vertical Applications

Product: SIL. As per instructions, do not allow to come into contact with the floors. (separate data sheet available).

Raised Access Floors

Separate data sheet available.

Dalsport,Dalkit,Dal-equipe Loose lay interlocking tiles

Product:
PRO 1 Heavy Duty Stripper

PRO 1 diluted 1:10 with cold water.
Apply the solution sparingly to the floor surface – do not allow it to dry out.
Allow 5 minutes contact time.
Use a cylindrical brush-scrubbing machine (if appropriate machinery is not available the floor can be damp mopped).
Remove slurry with a wet pickup, damp mop with water, allow the floor to dry thoroughly.
This procedure may need to be repeated if the waxy film (release agent from the manufacturing process) on the surface of the product is still present.

Maintenance

Product: PRO 1 Heavy Duty Stripper
Clean the floor with PRO 1 diluted 1:200 with cold water, if appropriate machinery is not available the floor can be damp mopped, then allow to dry.

Total Floor Care offers specific guidance on the purchase of all machinery and equipment we also offer demonstrations.

 
rubber floor maintenance Somerset

 
 

Home

Contact Us
Case Studies
Where We Work
Call Back Request

Floor Sanding

Technique and Technology
Estimates
Preparation and Repairs
Sound Proofing
Floor Insulation
Gap Filling
Colouring and Effects
Finishing and Seals
Overcoat
Maintenance

Floor Sander Hire

Sander Hire
Floor Sanding Equipment
Professional Finish

Floor Restoration

Wooden Floor Restoration
Terms and Conditions
Rubber Flooring Restoration

Maintenance

Wood
Rubber
Cleaning Equipment

Portfolio

Domestic
Commercial
Schools and Colleges
Rubber

Professional Floor Restoration Devon Professional Floor Sanding Devon Expert Floor Restoration Devon Expert Floor Sanding Devon

Total Floor Care, Jamsey Barton, Merridge Hill, Spaxton,Bridgwater, Somerset.TA5 1QW | Email: info@totalfloorcare.com
Bridgwater Office: 01278 588 027 | Cheltenham: 01242 801 974 | Bristol: 0117 405 8907 | Exeter: 01392 241 660
Swindon: 01793 230 567 | Cardiff: 02920 007 617 | Privacy Policy

Website Design by Vector7 Ltd